Post by s54smg2 on Jun 28, 2013 23:46:07 GMT -5
e46 m3 diy
Parts & Tools:
Disclaimer: Do this procedure at your own risk! This is offered for reference only. I disclaim all liability for direct, indirect, incidental, or consequential damages or injuries that result from the use of any of these examples, instructions, or other information.
Parts & Tools:
- Screwdriver
Shop
BMW M3 Air Filters
- remove mass air flow sensor connector by squeezing clips and pulling strait back
- unscrew the hose connecting the air muffler to the intake elbow
- pull the 2 clips on the intake muffler and remove the box
- remove old filter and replace with new filter
- when re-installing the intake muffler it can be tricky getting the tabs into position. I insert the muffler into the intake elbow first making it a bit easier
- aftermarket drop in filters are easier to install as most do not have the thick foam seal the oem filter has
Disclaimer: Do this procedure at your own risk! This is offered for reference only. I disclaim all liability for direct, indirect, incidental, or consequential damages or injuries that result from the use of any of these examples, instructions, or other information.
